SW-08C13: 0.8 L capacity, automatic rotating top water inlet, 6 temperature settings, and 3 measured-water settings (400/600/800 ml). The inner pot is made of 304 food-grade stainless steel. It has automatic power-off and boil-dry protection. Kettle power: 1000 W; sterilizing-pot power: 750 W.

Model: SW-08C13. One-touch automatic water filling without opening the lid; intelligent water boiling for tea. 8-minute sterilization, 3 water-volume settings, and 6 temperature settings.

Boil water with one touch and enjoy a new tea-making experience. Features include one-touch smart boiling, automatic rotating water filling, six-stage temperature control, high-temperature sterilization at 100°C, food-contact materials, and multiple safety protections.

Start smart boiling with one touch; filling, boiling, and warming are completed automatically. The sequence includes touch-to-start smart boiling, automatic rotating water filling from the water tower, automatic heating after filling, automatic warming after boiling, automatic refilling when the water level is low, and a memorized cyclic smart-boiling program.

In smart-boiling mode, the default warming function automatically heats the water to 100°C when its temperature falls below 90°C. The warming program closes automatically after 30 minutes without operation. If the kettle is not lifted for more than two hours in smart-boiling mode, the program closes automatically and enters standby. To avoid overflow, ensure there is no residual water in the kettle before starting.

Intelligent sensing enables automatic water replenishment. When the water level is too low, the appliance replenishes water automatically and stops once the preset amount has been added. In intelligent tea-making mode, automatic replenishment is available at a low water level.

Six temperature settings: 40°C for milk powder, 50°C for honey, 60°C for lemon tea, 80°C for green tea, 90°C for black tea, and 100°C for oolong tea.

Three water-volume settings: approximately 400 ml, 600 ml, and 800 ml. This setting is available when manual mode is selected.

High-temperature sterilization at 100°C; dust-proof storage.

Automatically stops after heating for 8 minutes.

Wide handle with an ergonomic design for a comfortable grip.

Spout designed for tea preparation, with a steady flow and clean cutoff.

304 stainless-steel seamless kettle for food contact, formed in one piece. It does not trap dirt and is easy to clean. The inner pot and lid are stainless steel.

304 food-contact sterilizing pot. The inner pot is 304 stainless steel, described as safe for sterilizing without unusual odors. The outer layer is PP, with heat-insulating and scald-prevention properties. 304 stainless steel is resistant to corrosion, acids, and alkalis.

Multiple safety protections: automatic water filling to help prevent dry boiling, standby when the kettle is lifted, automatic stop after 8 minutes of disinfection, automatic power-off when dry boiling, automatic power-off when overheated, and a concealed base electrode.

Toughened-glass touch panel: eye-catching and easy to wipe clean.

Attractive appearance; easy to clean and maintain.

Easy to clean, glass surface, intelligent touch control.

Equipped with a food-contact silicone water tube. The material is suitable for food contact and is described as durable.

Suitable for multiple settings; enjoy the pleasure of tea.

Enjoy a quiet moment with tea; for countertop use.

Welcome guests with good tea and conversation; for tea-tray use.

Water inlet tube installation: Insert the tube end without a metal fitting into the water-filler port. Insert the tube end with a metal fitting into the water container. Fit the dust cover onto the opening of the water container.

Model: SW-08C13. Dimensions: 37 × 20 × 25 cm. Product material: plastic exterior and steel interior; heating element: 304 stainless steel heating plate; color: Starry Black; controls: touch control. Rated voltage: 220V~. Kettle rated power: 1000W; sterilizing pot rated power: 750W. Kettle capacity: 0.8L; sterilizing pot capacity: 0.5L. Power cord length: approximately 0.75m.

Possible causes of rust spots

• Aging water pipes may introduce rust particles that adhere to the heating plate during boiling.
• After prolonged use, limescale and dirt may accumulate at the bottom of the tea maker. Contact with oxygen in the air may cause oxidation and rust spots.
• Leaving the appliance uncleaned for a long time, or cleaning it incompletely, may allow limescale to build up and rust spots to form at the bottom.

Cleaning suggestions

• Clean the tea maker promptly after each use to prevent long-term buildup of limescale and dirt.
• Boil white vinegar or citric acid in the appliance, then clean it with a scouring pad.
• A dedicated rust remover may be used to remove rust spots from the bottom of the tea maker.

Power cord information

The source states that the national mandatory standard limits the non-spiral power cord for this type of liquid heater to no more than 75 cm. It describes the cord length as the total length of the exposed portion outside the heating plate and the plug.

Usage note

The tea maker undergoes a clean-water test before leaving the factory; a small amount of residual water may be normal.